LT Security LTD7726 CD - Manual (Page 16)

●
DHCP
Select the DHCP, and enter into the interface as followings.
PORT:
the communicate port between PC and DVR, recommend use default port.
WEB PORT: setup the port of IE browser via HTTP.
Remark: when you setup the net mode as DHCP, the router will arrange a dynamic IP for DVR.
●
PPPOE
Select the PPPOE, and enter the interface as followings
MEDIA PORT
: the communicate port between PC and DVR, recommend use default port
WEB PORT: setup the port of IE browser via HTTP.
PPPOE username and password:
fill the username and password of the internet service offer,
and apply it and reboot the system. After rebooting, the device will save it and set the PPPOE as
default network type. If succeed, the IP address will be automatically config as dynamic IP of
WAN.
16