System maintain – LT Security LTD7726 CD User Manual
Page 25
SNESITIVITY:
Each channel has corresponding sensitivity setting, including four standards
high,higher,medium and low, press【Enter】key to switch
MD AREA:
each channel has corresponding regional motion detecting setting, move the cursor
to corresponding 【setting】,press【Enter】to enter regional setting interface, red area means it
have activated motion detection, transparent block means it have not activated motion detection.
Move the direction key on remote control to make cursor move in the small pane, green
frame means the cursor has moved to this pane, press【Enter】to select or cancel motion
detection of this small pane, when setup finished, press【exit】to back to MD setup interface, it will
save automatically.
Remark:
IR Operation: press [Menu] key to select or cancel the entire screen.
Mouse operation: click left and drag the frame to setup the region for motion detection.
2.2.3.7 SYSTEM MAINTAIN
Move the cursor to 【SYSTEM MAINTAIN】(icon highlighted when selected), and press
【
Enter】 to enter into system maintain setup interface.
25