LT Security LTD7726 CD - Manual (Page 48)

stop recording when it is in "start recording" or the video is in video plan. If you want to stop
recording, please set the time to not recoding.
12. Question:
Motion detection is not working?
Answer: :
— The setting of motion detection area is not correct
— Sensitivity is too low
13. Question: CD-writer /USB backup error
Answer:
— The data exceeds the capacity of backup device
— The backup device is incompatible
— The backup device is damaged
14. Question: Remote control cannot work?
Answer: :
— The address of remote control is not correct
— The distance of remote control is too far or the angle is too biased
— Remote control batteries run out
— Remote control is damaged or the front panel of DVR is damaged
15. Question: WEB cannot login?
Answer:
— Please check the network to see if it is connected. Check if LINK or 100M LED
is displayed normally on the panel; use ping xxx.xxx.xxx.xxx (DVR IP) to
check if the Internet is linked properly.
— Recommended to use Windows XP or Vista operating system, also use IE6.0
browser or IE7.0 browser
— ActiveX control has been blocked. Please manually install ActiveX control
again.
— Please install DX8.1 and upgrade your video card driver
16. Question: There is no picture or picture is not clear when you preview the
recording or playback the recording via IE
Answer:
— If you access DVR by IE, please choose "Wan" in "web environment"
— Please try "Close windows" by the right mouse button, and try "Open windows"
again
17. Question: It displays "other members are setting......" while setting DVR by IE
Answer:
— It probably means someone else is setting the DVR. Please check the DVR
configuration interface or exit DVR.
48