System info – LT Security LTD7726 CD User Manual
Page 23
into setting interface, you can setup the parameters for each channel separately.
CH1~CH4:
you can select the CH1~CH4, CH5~CH8, CH9~CH12, CH13~CH16 here.
PROTOCOL:
select the protocol of different PTZ, there are two protocols to switch, and the
default is Pelco-D
BAUD RATE:
select the different baud rate for your PTZ, there are 1200, 2400, 4800, and 9600
DATA BIT:
there are 5,6,7,8 options to select, default setting is 8.
STOP BIT:
there are 1and 2 to select, the default setting is 1.
VERIFY:
there are None/Odd/Even/Mark/Space to select, the default setting is none.
ADDRESS:
Fill the code of respective PTZ
2.2.3.4 SYSTEM INFO
Move the cursor to 【SYSTEM INFO】（Icon highlighted when selected）,press【Enter】to
enter into setting interface, at this interface mainly display system hardware features and
firmware version, include : Software version, MAC address and serial number.
23