LT Security LTD2308SE-B - Manual (Page 40)

Digital Video Recorder User Manual
34
4.5.3 Video loss
Step1: enter into system configurationalarm configurationvideo loss; refer to Fig 4-26:
Step2: the setup steps of video loss trigger are familiar with alarm handling; user can refer to Chapter 4.5.1 Sensor alarm
handling for more details.
Step3: user can also setup all channels with same parameters.
Step4: click
“apply” button to save the setting; click “exit” button to exit current interface.
Fig4-25 alarm configuration-schedule Fig 4-26 alarm configuration-video loss
4.5.4 Other alarm
This tab gives a choice to configure alarm for Disk Full, IP Conflict, the
Disconnect event, Disk Attenuation Warning or Disk Lost.
Step1: enter into system configurationother alarm; refer to Fig 4-27:
Step 2: Use the dropdown menu and select the event or the alarm.
Step 3: Check the required trigger options.
If the selected event is
“Disk Full”, then use the drop down box for “Disk
Shortage Alarm ” to choose a threshold value for remaining HDD space.
If the threshold value is reached, the system will trigger the Disk Full Alarm.
Click
“Apply” to save settings; Click “Exit” to exit the current interface. Fig4-27 other alarm