LT Security LTD2308SE-B - Manual (Page 51)

Digital Video Recorder User Manual
45
Fig 4-38 P.T.Z configuration-advance Fig 4-39 advance-preset setting
a. in the preset set interface, click Setting button to see a window as Fig
4-40
b. user can control the dome rotates up, up left, down, right down, left , left
down, right and up right and stop rotating; adjust the rotate speed and the
value of zoom, focus and iris of the dome; Fig 4-40 preset set-setting
c. select the serial number of the preset point. Click button to enable the PTZ wiper and click button to enable the
PTZ light.
Note: PTZ must support wiper and light, these two functional buttons can take effect. At the same time these two
buttons are just available when selecting PELCOP or PELCOD.
Click Save button to save the settings; click icon to hide the tool bar, right-key can remerge it; click icon to exit the
current interface.
d. in the preset interface, click OK button to save the setting; click Exit button to exit current interface.
Step3: in the Advance interface, click cruise
“Setting” button, a dialog box will pop-up as Fig 4-41:
a. click Add button to add cruise line in the list box (max 8 cruise line can be added); select a cruise line and click Setup button,
to see a window as Fig 4-42: