LT Security LTD2308SE-B - Manual (Page 44)

Digital Video Recorder User Manual
38
Attaching image: Tick off this item. The system will attach images when sending the emails.
Fig 4-31 network configuration-email
4.6.4 Server
This function is mainly used for connecting ECMS. The user
needs to enable the active report first in the ECMS when
adding a new device. Then enter into the server interface and
enable it. Input the IP address and port of the transfer media
server of ECMS. The default server port is 2009. If it is modified,
please enter into the transfer media interface to check. After the
user enables the active report, the ECMS system will auto allot
a Device ID. The user needs to check this reported device ID in
the ECMS.
Fig 4-32 network configuration-server