LT Security LTD2308SE-B - Manual (Page 60)

Digital Video Recorder User Manual
54
6.1.6 Record information
In this interface, a user can check resolution, ftp and record status including sensor alarm recording, motion recording, manual
recording or schedule recording.
6.2 Manual alarm
In this interface, user can check the relevant parameters of manual alarm.
6.3 Disk management
1. Format the disk
Step1: enter into disk management interface
Note: please format the hard disk before record. If not being formatted, it will show the status of the disk-free space,
and total space show OM at the bottom of screen.
Step2: click Refresh button to refresh the disk information of the list box; set the property of the disk then click Apply button to
save the setting
Step3: select a hard disk and click Format button to star format.
Note: all recorded files in the hard disk will be lost after formatted.
2. Advanced
User may check model, S/N, firmware, health status of the disk in this interface. User also can monitor the temperature, internal
circuit, dielectric material of the disk, analysis the potential problems of the disk and warn so as to protect its data.
6.4 Upgrade
At present, it only supports USB update. Get the software from your vendor when there is a new software version, and make
sure it is corresponding with the DVR. User can check the USB information in Disk management.