Hardware installation, Install hard drive &dvd writer, Install hard drive – LT Security LTD2508SE User Manual
Page 10: Step1: unscrew and open the top cover, Step3: screw the hdd, Install dvd writer, Step3: screw the dvd writer as fig 2.2, Fig 2.2 connect the dvd writer, 2 hardware installation, 1 install hard drive &dvd writer
DVR User Manual
4
2 Hardware Installation
Notice: Check the unit and the accessories after getting the DVR.
Please disconnect the power before being connected to other devices. Don't hot plug in/out
2.1 Install Hard Drive &DVD Writer
2.1.1 Install Hard Drive
Notice: 1. This series support 4-ch and 8-ch connect to two SATA hard drivers or one SATA hard driver plus one Writer; 16-ch
connects three SATA hard drivers or two hard drivers plus one DVD Writer. Please use the hard drive the manufacturers
recommend specially for security and safe field.
2. Please calculate HDD capacity according to the recording setting. Please refer to “Appendix B Calculate Recording
Capacity”.
Step1: Unscrew and Open the top cover
Step2: Connect the power and data cables. Place the HDD
onto the bottom case as Fig 2.1.
Step3: Screw the HDD.
Note: For the installation convenience, please connect the
power and data cables firstly, and then screw to fix.
Fig 2.1 Connect HDD
2.1.2 Install DVD Writer
Notice: 1. The writers must be the compatible devices we recommend. Please refer to “Appendix C Compatible Devices”
2. This device is only for backup
Step1: Unscrew and Open the top cover
Step2: Connect the power and data cables. Place the
DVD writer onto the bottom case.
Step3: Screw the DVD writer as Fig 2.2.
Fig 2.2 Connect the DVD Writer