LT Security LTD2508SE - Manual (Page 37)

DVR User Manual
31
Fig 4-26 alarm configuration-video loss
4.5.4 Other alarm
This tab gives a choice to configure alarm for Disk Full, IP conflict, the Disconnect event or Disk Warning.
Step1: enter into system configuration
other alarm; refer to Fig 4-27:
Use the rop0down menu and select the event for the alarm.
Check the required trigger options.
Buzzer: If selected, the local buzzer would be activated on
an alarm.
Email: If selected, the DVR will send an email alert to the
preconfigured email address.
To Alarm out: If selected, it would trigger the inbuilt relay
on the set event alarm.
Fig4-27 other alarm
Step 2: select a hard disk in the pull down list box. When the disk capacity is lower than that value, there will appear some text
information on the lower right of the live image.