LT Security LTD2508SE - Manual (Page 33)

DVR User Manual
27
4.5 Alarm configuration
Alarm configuration includes five sub menus: sensor, motion, video loss, other alarm and alarm out.
4.5.1 Sensor
Sensor includes three sub menus: basic, alarm handling and schedule.
① Basic
Step1: enter into system configuration alarm
configuration sensorbasic; refer to Fig 4-19:
Step2: enable sensor alarm and then set the alarm type
according to triggered alarm type. Two option: NO and
NC.
Step3: user can setup all channels with same parameters,
tick off “all” to do relevant setup.
② Alarm handling
Step1: enter into system configuration alarm
configuration sensoralarm handling; referring to Fig
4-20:
Step2: select hold time and click Trigger to display a
screen as shown in Fig 4-21:
Fig 4-19 alarm configuration-sensor-basic
Fig 4-20 alarm configuration-sensor-alarm handling Fig 4-21 alarm handling-trigger