LT Security LTD2508SE - Manual (Page 34)

DVR User Manual
28
Step 3: If Buzzer is selected, there will be triggered buzzer alarm out.
Full screen alarm: when alarm is triggered, there will pop up full screen alarm;
Email: Select this function. When an alarm is triggered, a notification email will be sent to user’s designed email box including
trigger events, time, snap pictures, device name, ID camera name etc.
Snap: Select channels. When an alarm is trigged, the system will automatically save the captured pictures from the selected
channel. If user ticks off Email function, these pictures will also be sent to user’s designed email box.
To alarm out: After selecting the channel, there will be triggered alarm out in the designated channel. Click OK button to save
the setting; click Exit button to exit the current interface.
To record: Select recoding channels. It will record the camera when alarm is triggered. Click OK button to save the setting; click
Exit button to exit the current interface.
To P.T.Z: set linked preset and cruise for alarm. User can select any channel and multi channels as linked channels. Click OK
button to save the setting; click Exit button to exit the current interface.
Step4: user can setup all channels with same parameters. Tick off “all” to do relevant setup.
① Schedule
Step1: enter into system configuration alarm
configuration sensorschedule; refer to Fig 4-22:
Step2: the setup steps of sensor schedule are familiar
with schedule; user can refer to 4.4.1 Schedule for
details.
Note: the default schedule of sensor is full-selected,
that is, the color of schedule setting interface is blue.
Fig 4-22 sensor-schedule
4.5.2 Motion
Motion includes two sub menus: motion and schedule.
① Motion
Step 1: enter into system configuration
alarm configurationmotion; refer to Fig 4-23: