LT Security LTD911M6KIT2 - Manual (Page 17)

User Manual
16
NOTE: To adjust the IP ADDRESS，SUBNET MASK and GATEWAY value, only when the
[STATIC] mode is being selected.
GATEWAY: Set this number to the gateway
set by your modem/router.
DNS ADDRESS: This code should be provided
by your local ISP.
HTTP PORT: This port number is used to
communicate with PC Client. The default value is
80(Can be changed from 1024 to 49151)
USER SETUP: When accessing the DVR
from a remote location you will be prompted
for a login and password. The default is
“admin” for full administrator rights. Set “User
ID” and password to setup a user with limited
rights to prevent tampering.
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
(HTTP PORT) 80, 1024-49151
( )MOVE (SEL)SELECT (MENU)EXIT
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
[ 80]
NETWORK SETUP
MAC ADDRESS
<00:11:22:33:44:55>
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
DDNS SETUP
(HTTP PORT) 80, 1024-49151
( )MOVE (SEL)SELECT (MENU)EXIT
NETWORK SETUP
MAC ADDRESS
IP ALLOCATION
IP ADDRESS
SUBNET MASK
GATEWAY
DNS1 ADDRESS
DNS2 ADDRESS
HTTP PORT
USER SETUP
DDNS SETUP
[0.0.0.0]
[0.0.0.0]
[ 80]
<00:11:22:33:44:55>
[STATIC]
[192.168.1.100]
[255.255.255.0]
[192.168.1.1]
[0.0.0.0]
[0.0.0.0]
(HTTP PORT) 80, 1024-49151
( )MOVE (SEL)SELECT (MENU)EXIT
[ 80]
USER SETUP
ADMIN ID …… [admin]
ADMIN PASSWORD [admin]
[ ] USER ID
USER PASSWORD
[ ]
( )MOVE (SEL)SELECT (MENU)EXIT