LT Security LTD911M6KIT2 - Manual (Page 9)

User Manual
5.5 Record Frame Rate
8
6
f
I
a
(
t
The total frame rate is 50fps (PAL) or
0fps (NTSC). You can set the frame rate
or the channel which you selecte to record.
f the sum of the frame rate you select for
ll cameras is more than 50fps (PAL)/60fps
NTSC), the DVR will automatically adjust
he largest frame rate value to a smaller
value.
1 5 FPS 2 5 FPS 3 5 FPS
RECORD FRAMERATE
TOTAL 45FPS
4 5 FPS 5 5 FPS 6 5 FPS
7 5 FPS 8 5 FPSN 9 5 FPS
( )MOVE （SEL）+ ( □ ) - (MENU) EXIT
Press [▲, ▼, ◄◄ or ►►] button to select a channel, and then press [SEL] to
increase the value or press [
■
STOP] to reduce the value.
Note: Higher frame rate shows smooth images, but requires more hard drive
space.
5.6 Video Quality
Video Quality has 4 different settings:
Highest, High, Normal and Low.
The higher the video quality, the
better quality of Images, however higher
quality images require more hard drive
space.
MAIN MENU
CAMERA SETUP
RECORD SETUP
RECORD FRAMERATE
VIDEO QUALITY NORMAL
RECORD SCHEDULE
SENSOR SETUP
HARD DRIVE SETUP
MISCELLANEOUS SETUP
NETWORK SETUP
LANGUAGE ENGLISH
RESET MENU
( )MOVE (SEL)SELECT (MENU)EXIT
5.7 Record Schedule
Setting the Record Schedule allows you to customize the type of recording
depending on the time of day.
Press [SEL] to change the quality
setting.
The time line indicates 24 hours of a
day based on AM/PM (0 = 12).
Press [▲, ▼, ◄◄ or ►►] button
to select a time point, press [SEL] to
modify the recording mode.
RDCORD SCHEDULE
AM PM
0… 3… 6… 9… 0… 3…. 6… 9…
NO-RECORD
NORMAL-RECORD
SENSOR-RECORD
( )MOVE (SEL)SELECT (MENU)EXIT
S