LT Security LTD911M6KIT2 - Manual (Page 8)

User Manual
5.2 Menu Overview
Menu Directory
Camera Setup
7
Record Setup
Record Frame rate
Video Quality
Record Schedule
Sensor Setup
Hard Drive Setup
Miscellaneous Setup
Network Setup
Language
Reset Menu
5.3 Camera Setup
Se
5.4 Record Setup
Camera Setup allows you to turn
cameras on or off.
Press [▲, ▼, ◄◄ and ►►] buttons
to select a channel and then press [SEL]
to modify the setting ON or OFF.
Note：If a camera channel is set to OFF ,it
will not be recorded(Refer to 6.4 Record
tup)
Main Menu
Change Password
Set Time
Hidden Channel
Audio Port Setup
PTZ Setup
Image Parameters
Password Enable
Keypad Tones
Seq.Dwell Time
VGA Setup
Record Setup allows you to set up
recording channels.
Press [▲, ▼, ◄◄ and ►►] buttons to
select a channel, and then press [SEL] to
modify the setting to ON or OFF.
If a channel is disabled in Camera Setup, it
will not record and the DVR will display
“NOCAM” on screen.
1 ON 2 OFF 3 ON
RECORD SETUP
4 ON 5 ON 6 ON
7 ON 8 ON 9 ON
( ) MOVE （SEL）SELECT (MENU)EXIT
1 ON 2 OFF 3 ON
CAMERA SETUP
4 ON 5 ON 6 ON
7 ON 8 ON 9 ON
( )MOVE （SEL）SELECT (MENU) EXIT