Seed Hawk GRANULAR AND LIQUID TANKS 2008 - Manual (Page 28)

OPERATION
NOTE: In the case of a single fan configuration used to double-shoot
product, follow the above procedure and adjust the position of the air
damper, 1, FIG. 46, to set an effective air flow for each product.
IMPORTANT: DO NOT set fan speed above 5000 rev/min. Excessive
fan speed will damage the fan drive motor and requires more power from
the tractor hydraulic system.
GROUND DRIVE METERING
The ground drive metering
system is engaged by activating
an electric clutch, 1 FIG. 34. A
switch on the control panel in the
cab toggles “ON” and “OFF”
FIG. 34 and a lamp in the switch
indicates when the switch is
toggled “ON”.
1
FIG. 34