SoleusAir SE-PAC-08E9 - Manual (Page 9)

9
OPERATING INSTRUCTIONS
CONTROL PANEL BUTTONS
1) Power On and Off - Press the POWER button once to manually turn the unit on. Press the POWER
button once more to turn the unit off.
2) Mode Selection - Press the MODE Button repeatedly to cycle between the different modes: Air
Conditioner, Dehumidifier, Fan only mode. Each press of the MODE button will light up a different
icon on the control panel. The exhaust hose and window kit must be installed when the unit is in Air
Conditioner, Dehumidifier mode. When using the unit as a fan, it is not necessary to keep the exhaust
hose and window kit connected to the unit.
3) Temperature - Select the desired temperature by pressing either - or + key when using the unit in
cooling mode. The temperature indicator flashes to display the desired temperature setting. After the
temperature is set, the unit will display this temperature setting until it is changed by the user. The tem-
perature indicator display shows temperature in Celsius or Fahrenheit. Press the - and + simultane-
ously to change between Celsius and Fahrenheit .
4) Bucket Full - when the unit can not evaporate the collected moisture fast enough. The excess water
will collect in a backup water tank located inside the unit. The bucket full icon will light up if this
occurs.
5) Louver Direction - This unit has 4-way directional louvers. Use the louver guides manually to direct
air where cooling or fanning is needed most.
POWER BUTTON
MODE BUTTON
TEMPERATURE AND TIMER
INDICATOR
BUCKET FULL
TIMER/TEMP DECREASE TIMER/TEMP INCREASE
AIR CONDITIONER MODE DEHUMIDIFIER MODE
FAN MODE
CONTROL PANEL, DISPLAY, & OPERATING INSTRUCTIONS
CONTROL PANEL