Spectra Precision MobileMapper Field & Office Software - Manual (Page 13)

Engl
ish
5
With the Enable voice guidance option enabled (see
Menu, Options, Voice tab), a vocal message will be
issued when a position solution is available, and then
every time the position status changes.
– Column #2:
Current value of PDOP.
Age of corrections in all differential modes.
– Column #3: Current values of HRMS and VRMS.
– Column #4: “REC” if the raw data logging option is
unlocked and active.
• [2]: Name of the currently open job.
• [3]: This symbol shows your current position. The arrow
points in your last walking direction.
• [4]: Current 3D position of the receiver (no coordinates
displayed if the receiver has not determined its position
yet).
• [5]: Log button. Use this button to log features. The
button is grayed until GPS positions are computed and a
layer is added to the open job. You can use either the on-
screen Log button or the left-hand “–” context-sensitive
key on the keyboard to access the Log function.
• [6]: Button used to show or hide the Microsoft keyboard.
• [7] Menu button. Gives access to the MobileMapper Field
function menu. You can use either the on-screen Menu
button or the right-hand “–” context-sensitive key on the
keyboard to show or hide the function menu.
Menu Option Function
Pause Use this option to pause the current feature logging.
Stop Use this option to stop the current feature logging.
Layers... Use this option to add, modify or remove layers.
Find...
Use this option to find a feature previously logged in the
open job.
Go To...
Use this option to let the receiver guide you to the
selected target (a feature name or any coordinates).
Initialize...
Gives access to two RTK initialization functions (On the
Fly, From Known Point). Usable only when the receiver
can operate in RTK.
Zoom In Increases the scale of the map view by one step.
Zoom Out Decreases the scale of the map view by one step.
Job
Gives access to job-related functions: New, Open (and
Properties if a job is already open).
Options
Allows you to access the following settings: Units,
Antenna, Recording, Map, View, E-compass, Filter, Exter-
nal Devices, Voice and Keyboard.