Spectra Precision MobileMapper Field & Office Software - Manual (Page 44)

English
36
Editing a Feature When the map screen displays the feature you want to edit
and you know which changes need to be made to its
attributes, do the following.
• Tap on the feature symbol.
• When you see a bold orange line surrounding the feature,
release the stylus. The program then displays the list of
attributes pertaining to the feature.
• Edit the attributes that need changes and then tap OK. In
the case of a point feature, you are also allowed to update
its position by tapping on the
Update button located in the
lower bar. Before tapping on this button, make sure you
are located exactly over this point as this will launch a new
position averaging sequence for your receiver’s current
position.
Find Feature
Function
MobileMapper Field allows you to search for a particular
feature you logged in a map. MobileMapper Field will ask you
to indicate the layer it belongs to, and optionally, the known
value of one or more of its attributes. As a result,
MobileMapper Field will list all the features meeting your
requirements.
• Tap Menu>Find.... MobileMapper Field displays one of the
layers present in the map as well as the names of the
different attributes attached to that layer.
• In the Find field, select the layer type of the feature you
are searching for.
• Optionally, tap on each of the attributes for which you
want to define a specific search criterion and then enter it.
• Tap on the Find button to start the search. MobileMapper
Field will list all of the features in the map which meet the
search requirements.
From this list you select the desired feature and see where
this feature is located on the map screen. In addition, by
selecting
Menu>Go To..., MobileMapper Field will give you
the option of navigating to this feature.