Spectra Precision MobileMapper Field & Office Software - Manual (Page 56)

English
48
• Click Search, then wait until the search is complete. At the
end of the search, MobileMapper Office lists the stations
meeting the search request.
• Select the most suitable reference station, mainly
according to the distance (baseline) to that station.
• Click Download. MobileMapper Office imports the base
raw data and then show its properties in areas [5] and [6].
NOTE: Spectra Precision does not guarantee 100%
quality results when using raw data files from reference
stations that are situated beyond 200 km (125 mi) from
your working area. It is also important to check that the
downloaded base data offer at least the same type of raw
data as the rover. If for example, the rover data are GPS/
GLO L1 data, then the base data should be at least GPS/
GLO L1 data. The post-processing may otherwise be
degraded to a certain extent.
• Click on Start Processing. MobileMapper Office post-
processes the different files present in the project. Below
is an example of what can be seen in the Layers pane at
the end of the post-processing step: