Spectra Precision MobileMapper Field & Office Software - Manual (Page 39)

Engl
ish
31
– Record: Opens the recorder bar from which you can
start, then, stop recording a voice message as an
attribute of the current feature.
1: Drags the recorder bar.
2: Starts voice recording.
3: Pauses voice recording.
4: Plays back voice recording.
5: Stops voice recording.
6: Closes the recorder bar
– Play: For check purposes, select this function to play
back the voice message you’ve just recorded
(equivalent to “4” button on recorder bar)
– Remove: Select this function to delete the existing
voice message. You will use this function when you
wish to record a new voice message for the current
feature.
NOTE: Voice attributes are saved as WAV files in the same
folder as the layer they belong to. The file naming
convention used is Sound#.wav where # is the record
number (1, 2, 3, etc.). The record number is ascribed in
chronological order, with no reference to any other file.
• For a “Yes/No” attribute, the default choice is “No”. Tap
on the attribute name to change the setting and then tap
OK.
• For a date attribute, the current date is automatically
assigned (software-set attribute). To change the date, tap
on the
Date attribute and select the new date from the
displayed calendar and then tap OK.
• All other software-set attributes are assigned
automatically by MobileMapper Field.
1 3 5
2 4 6 6