Spectra Precision Survey Pro v5.4 User Manual
Page 55
Advertising
45
The
New Backsight Circle will be preset to zero, unless you are surveying with
true azimuths.
In the true azimuth case, the circle will be the azimuth from the new
location occupied by the station back to its previous location, which is now
your backsight point.
• Tap
Next and complete the station setup as you would normally do using the
Known Point (backsight) method (see [2]).
NOTE: The
Station Setup routine can be used at any point to occupy any existing
point in the job at any time. It is up to you to determine if and when this is
appropriate.
[1] [2]
Advertising