Spectra Precision Survey Pro v5.4 - Manual (Page 99)

89
Target management:
(Item [15]) on the screen example.)
• HR field: Enter the height of rod for the selected target
• / button: Specify the type of target used. Also provides access to the
management of smart targets.
• Choose the EDM measurement mode. This is an instrument-dependent
setting but these are the usual available options:
– Standard: (Focus 30) Precise measurement mode, activated only when
you trigger a measurement
– Tracking: (Focus 30) EDM continuously measuring distances
– Normal: (Nivo) Normal measurement mode
– Precise: (Nivo) Precise measurement mode
Other control buttons:
• [16]: A button equivalent to and bigger than button [3].
• [17]: Turns on or off the instrument’s track light. The track light is for
helping the rodman stay online when staking. It will flash more quickly
when the instrument is locked to the target.
The track light is instrument dependent. For example, the Focus 30 has
two different colors (green and red) located on either side of the
instrument. Nivo has two red colors, one that flashes and the other that
doesn’t.
• [18]: Instrument dependent. Shows LockNGo status (IDLE, MEASURING
or Locked). Also shows if the current measuring mode uses a prism or
reflectorless target.