Spectra Precision Survey Pro v5.4 - Manual (Page 72)

62
• Step 3: The calibration results page will solve the calibration and display
the results.
You can change the contribution of your control points to the calibration
solution by tapping on the columns next to each point name in the list:
– Tap in the H column to deselect or select a point to be used in the
horizontal calibration.
– Tap in the V column to deselect or select a point to be used in the
vertical calibration.
Any time you change the contribution of a control point, the Finish button
will change to a Re-Solve button. Tap this button to re-solve the calibration
using the new contribution of that control point.
Tap Finish to accept
the good calibration
Tap Finish to accept the solution anyway
Tap Add Point to collect more
control points, as in Step 2.
Yes
Yes No No
From Step 2
To Step 2
Blunders
Detected
Control points
are spaced evenly
and have good
geometry?
Blunder
Detection Runs
No Blunders
Detected