Spectra Precision Survey Pro CE v3.80 Ranger GPS Reference Manual - Manual (Page 38)

GPS Reference Manual
38
Mapping Plane
6XUYH\ 3URMHFWLRQ +RUL]RQWDO 
The Horizontal tab of the Projection screen is explained below for
when the horizontal projection type is set to
Mapping Plane .
Status Line : The lines of text on the top of the
screen display the status of the horizontal
projection solution. Status will be:
•
No zone selected : No map projection zone
or localized site is set.
•
Projection zone selected . A map projection
from the database is set. The zone group
and zone name of the selected zone are
displayed.
•
Zone based localization solved . Horizontal
localization parameters are applied to the
selected map projection. The zone group and site name are
displayed.
Note: Not all configurations of Survey Pro can setup ground sites.
However, all configurations of Survey Pro can read ground sites.
•
Ground coordinate system solved . The selected map projection
zone, or the localized zone based site, has a ground coordinate site
applied.
•
Localized ground coordinate system solved . The selected map
projection zone, or the localized zone based site, has a ground
coordinate site applied.
6HOHFW =RQH« : opens the Mapping Plane Setup screen, where you can
choose a zone or site from the data base, key in a custom zone, and
delete zones or sites from the database.
6KRZ 'HWDLOV« : opens the Projection Details screen, where the
complete details of the localization solution, reference map projection,
and Geoid model are displayed.