Spectra Precision Survey Pro CE v3.80 Ranger GPS Reference Manual - Manual (Page 87)

Stakeout Menu
87
Stake DTM
6WDNHRXW 6WDNH '70 
The Stake DTM routine allows you to stake an area and get cut / fill
and volume information based on a reference DTM or specified
elevation datum.
The first screen of this routine is similar to the conventional method,
except that the
%DFNVLJKW button is replaced with a 6HWXS +5 button
to configure rover antenna and the backsight information is replaced
with rover antenna height information. See the conventional
reference manual for details.
DTM GPS Shot
6WDNHRXW 6WDNH '70 6ROYH 
The DTM GPS Shot screen displays all relevant
information on the current rover position and a
graphic that shows the rover location, the
occupied TIN triangle, and the rectangular DTM
corners of the DTM boundary.
Note: the DTM boundary corners and TIN
triangle may not be visible depending on the
current scale of the screen.
2&&83<,1* / 529,1* : switches from
ROVING to OCCUPYING mode. When ROVING, the receiver is in
dynamic mode and will calculate your position as you move to the
point. When
OCCUPYING, the receiver is switched to static mode
(depending on settings) and will calculate the most precise position
for the staked point.