Spectra Precision Survey Pro v3.80 Recon GPS User Manual - Manual (Page 60)

GPS User’s Manual
56
4. Tap )HDWXUH. On the Feature Collection screen, select a
Method .
An explanation of the selected method is displayed at the bottom
of the screen. See the reference manual for more information.
5. If you select a continuous method, you must specify an
appropriate
Interval .
6. Tap 6WDUW to begin measurements. The Occupy Data Point screen
displays the local coordinate.
7. When you are ready to begin continuous collection, tap $FFHSW.
8. If you are using a continuous interval, $FFHSW disappears and
points are stored when the interval is exceeded.
9. If your mode is Manual , tap $FFHSW when you want to collect a
point. If your mode is Manual: multi descriptions , you will be
prompted for a description, layer, and attributes (if set) for each
point.
10. If you want to see a list of points stored so far, tap
9LHZ 3RLQWV.
11. Tap 'RQH to end feature collection and return to the Data
Collection screen.
Note: When doing continuous data collection, if your interval is
exceeded, but your acceptance criteria or RMS criteria are not met,
then you will be prompted to
Accept the point anyway or to Wait for
the measurement to pass. If you choose to Wait , and then Cancel , you
will be prompted to Accept the point anyway or to Exit .