Introduction, Abbreviations used, Qualifications – American Water Heater (A)BCG3 85T500-8N User Manual

Page 6: Abbreviations used qualifications

Advertising
background image

6

Thank you for purchasing this water heater. Properly installed

and maintained, it should give you years of trouble free service.

aBBreViations used

Abbreviations found in this Instruction Manual include :

• ANSI - American National Standards Institute
• ASMe - American Society of Mechanical engineers
• GAMA - Gas Appliance Manufacturer’s Association
• NeC - National electrical Code
• NFPA - National Fire Protection Association
• UL - Underwriters Laboratory
• CSA - Canadian Standards Association

Qualifications

Qualified installer or serVice agency
Installation and service of this water heater requires ability

equivalent to that of a Qualified Agency (as defined by ANSI

introduction

below) in the field involved. Installation skills such as plumbing,

air supply, venting, gas supply and electrical supply are required

in addition to electrical testing skills when performing service.

ansi Z223.1 2006 sec. 3.3.83: “Qualified Agency” - “Any

individual, firm, corporation or company that either in person

or through a representative is engaged in and is responsible

for (a) the installation, testing or replacement of gas piping

or (b) the connection, installation, testing, repair or servicing

of appliances and equipment; that is experienced in such

work; that is familiar with all precautions required; and that

has complied with all the requirements of the authority having

jurisdiction.”

If you are not qualified (as defined by ANSI above) and licensed

or certified as required by the authority having jurisdiction

to perform a given task do not attempt to perform any of the

procedures described in this manual. If you do not understand

the instructions given in this manual do not attempt to perform

any procedures outlined in this manual.

Advertising
This manual is related to the following products: