Alpine Navigation Radio - Manual (Page 11)

8
S YSTEM I NTRODUCTION
letter of the street name and press ENTER. Highlight the
second letter and press ENTER. Continue this process
until the name is spelled out. Highlight “Street List” and
press ENTER to continue.
6. The
Select Street Name screen
appears. Select a street name
and press ENTER.
7. The
Input Address Number screen
appears. Use the Select Encoder to
input the address number. Use the
same procedure that you used for
inputting the street name in Step 5.
When you are finished, highlight
“Done” and press ENTER.
NOTE: If the chosen address is in more than one city, the Select a City
screen will appear. If this is the case, highlight the correct city and press
ENTER to continue.
8. The Confirm Destination
screen appears. This screen
shows the address of the input
destination. If this is your de-
sired destination, highlight
“OK” and press ENTER. The
system will now calculate your
route for you.
9. When your route has been cal-
culated, the Map screen will
appear. You are now ready to
begin traveling to your desired
destination.
10. Proceed to the route. When driving begins, voice direc-
tions and map displays will guide you to your destination.
The map will show the destination as a star.
NOTE: For more information about the screens used in this example
and the options associated with them, please refer to the appropriate
section in this manual.