Alpine Navigation Radio - Manual (Page 40)

37
4. When you have selected all the roads that you wish to
avoid, select “OK to Proceed”. The system will now re-
calculate your route.
To view a map of the destination, select the destination ad-
dress located at the bottom of the
Maneuver List screen and
press ENTER. The map appears.
Creating a Detour
When you encounter an undesirable road condition, you can
use the Detour option to calculate a different route, if possible,
from the next intersection for 1 mile on surface streets and 5
miles on freeways.
1. To create a detour, select “Detour” from the Select
screen. Press ENTER.
2. A confirmation screen appears. Select “Yes” to create a
detour. Press ENTER.
3. The system will then re-calculate the route.
Changing Current Routing Method
This screen allows you to customize the route by selecting the
quickest route, minimizing or maximizing freeway travel, or
minimizing toll roads. Only 1 option at a time may be chosen.
1. To change the current routing method, select “Change
Current Method” from the Select screen.
2. The Change Current Method
screen appears. Select the de-
sired mode.
• Quickest Route : Calculates the shortest driving time.
• Maximize Freeways : Makes the most efficient use of
freeways.
• Minimize Freeways : Uses mostly surface streets.
• Minimize Toll Roads : Uses the least number of pay
roads.
3. Press ENTER. The system will now use the new routing
information when calculating a route.
R OUTE M ENU