Alpine Navigation Radio - Manual (Page 22)

19
NOTE: The procedure for searching by City Name is similar to the
Street Address procedure. Instead of inputting address information,
however, input the name of a city. Follow the screens until you have
input your city name. You will then be directed to input the street name.
4. The Input Street Name screen
appears. Use the Select Encoder
to spell out the street name.
Highlight the first letter of the
street name. Press ENTER.
5. The selected character appears in the text window. Input
the rest of the name. Select “Street List” to continue.
6. The Select Street Name screen appears. Select a street
name and press ENTER.
7. The Input Address Number
screen appears. Use the Select
Encoder to input the address
number. When you are fin-
ished, highlight “Done” and
press ENTER.
NOTE: If the chosen address is in more than one city, the Select a City
screen will appear. If this is the case, highlight the correct city and press
ENTER to continue.
8. The Confirm Destination screen appears showing the
address of the selected destination. If it is correct, select
“OK” and press ENTER. The system will calculate a
route to the destination.
NOTE: Select “Options” to add this destination to your Trip Itinerary,
save it in your Address Book, locate local POIs, or change route op-
tions. Select “Map” to verify or modify the location of your destination on
the map. (See “Confirm Destination Screen” section for more details.)
D ESTINATION M ENU