WEN 5182 18 Volt Cordless Drill/Drive Kit - Manual (Page 10)

POWER INDICATOR
This drill is equipped with a power indicator which is used to display the battery pack’s
remaining run time. Press the power indicator button to display the LED lights. When the battery
capacity indicator is red, the battery has less than 30% of its capacity and should be charged.
(1) Power Indicator Button- Press it to display the LED lights
(2) Red Light
(3) Yellow Light
(4) Green Light
Full Power Green, yellow and red lights are on.
Full Power But Will Require Charging Shortly
(70%-80% Charge) Yellow and red lights are on.
Needs charging the battery Only red light is on.
TRIGGER SWITCH
To turn the drill/driver ON, depress the trigger switch. To turn it OFF, release the trigger switch.
WARNING: Do not operate for long periods at low speed because excess heat will
be produced internally.
(4)
(1) (3) (2)
VARIABLE SPEED
The variable-speed trigger switch delivers higher speed with increased trigger pressure and lower
speed with decreased trigger pressure.
10