WEN 5182 18 Volt Cordless Drill/Drive Kit - Manual (Page 8)

KEYLESS CHUCK
The 3/8" keyless chuck allows you to hand-tighten or release the drill bit in the chuck jaws.
FORWARD/REVERSE/CENTER LOCK
The direction of rotation selector located above the trigger switch changes the direction of bit
rotation. Setting the trigger switch in the OFF (center lock) position helps to reduce the
possibility of accidental starting when not in use.
LED WORK LIGHT
Pressing the trigger switch illuminates the LED work light, located on the front of the Drill
Driver. This feature provides extra light for increased visibility.
ASSEMBLY
WARNING! If any part is broken or missing, do not attempt to plug in the power cord
or operate the Drill/Driver until the broken or missing part is replaced. Failure to do so
could result in possible serious injury.
WARNING! Do not attempt to modify this Drill/Driver or create accessories not
recommended for use with this Drill/Driver. Any such alteration or modification is
misuse and could result in a hazardous condition leading to possible serious injury.
WARNING! To prevent accidental starting that could cause serious personal injury,
always remove the battery pack from the Drill/Driver when assembling parts.
UNPACKING
This product has been shipped completely assembled.
1. Carefully remove the tool and any accessories from the box. Make sure that all items listed in
the packing list are included.
2. Inspect the tool carefully to make sure no breakage or damage occurred during shipping.
3. Do not discard the packing material until you have carefully inspected and satisfactorily
operated the tool.
PACKING LIST
Drill Driver, 6 Bits, 6 Drill Bits, 1 Bit Holder, 1 Extra Battery, Charger, Carrying Case and
Operator’s Manual
8