Aposonic A-S3216T3 - Manual (Page 26)

DVR User Manual
20
4.2.2 Main Monitor
Step1: Enter into MenuSetupLiveMain Monitor tab. Refer to Fig
4-8:
Step2: Select split mode: 1Ч1
、2Ч2、2Ч3、3Ч3、4Ч4 and channel. Click
button to setup the previous channel group. Click button to set
the latter channel group.
Step3: Set the dwell time.
Step4
: Click “default” to restore default setting; click “apply” to save the
setting; click “exit” to exit current tab. Fig 4-8 Live Configuration-Host Monitor
4.2.3 Spot
Step1: Enter into MenuSetupLiveSpot tab. Refer to Fig 4-9:
Step2: Select split mode: 1×1 and map the channel
Step3: Set the dwell time.
Step4: Select the split mode and then setup current picture group. Click
button to setup the previous channel groups of dwell picture. Click
button to set the latter channel groups of dwell picture.
Step5: Click “apply” button to save the setting; Click “exit” button to exit
current tab. Fig 4-9 Live Configuration-Spot
4.2.4 Mask
You can setup private mask area on the live image picture. For a given channel a maximum of three areas can be masked.
Setup mask area: Click Setting button, enter into live image to press left mouse and drag mouse to set mask area. Please
refer to the below picture. Right click to exit. Click Apply button to save the setting.
Delete mask area: Select a certain mask area and double click to delete that mask area. Then click Apply button to save the