Aposonic A-S3216T3 - Manual (Page 32)

DVR User Manual
26
4.4.2 Motion
This tab allows to setup schedule for motion based recording.
Step1: Enter into MenuSetupScheduleMotion tab. Refer to Fig
4-17:
Step2: The setup steps for schedule for motion based recording are
similar to normal schedule setup. You can refer to 4.4.1 Schedule for
details.
Note: The default schedule of motion based recording is 24x7, that is,
the color of schedule settings interface is dark blue. This enables motion
based recording for 24x7. If you want to activate motion based recording,
you must enable motion alarm and setup schedule for motion alarm
(Refer to Chapter 4.5.2 Motion Alarm for more details). Fig 4-17 Schedule Configuration-Motion
4.4.3 Sensor
This tab allows to setup schedule for sensor based recording.
Step1: Enter into MenuSetupScheduleSensor tab. Refer to Fig
4-18:
Step2: The setup steps for schedule for sensor based recording are
similar to normal schedule setup (Refer to 4.4.1 Schedule for details).
Note: The default schedule of sensor based recording is 24x7, that is,
the color of schedule settings interface is dark blue. This enables sensor
based recording for 24x7. If you want to activate sensor based recording,
you must enable sensor alarm and setup schedule for sensor alarm
(Refer to Chapter 4.5.1 for more details).
Fig 4-18 Schedule Configuration-Sensor