Aposonic A-S3216T3 - Manual (Page 29)

DVR User Manual
23
Fig 4-12 Record Configuration-Record Bitrate
4.3.3 Time
Step1: Enter into MenuSetupRecordTime interface. Refer to
Fig 4-13:
Pre-alarm record time: The record time prior to actual triggering of
an alarm i.e. record time before motion detection or a sensor alarm
was triggered.
Post-alarm record: Set the post recording time after the alarm is
finished, five options: 10s, 15s, 20s, 30s, 60s, 120s, 180s and 300s.
Expire time: The time till which the records would be retained. If
the set date is overdue, the recorded files will be deleted
automatically.
Step2:
Select “All” to setup all channels with the same parameters.
Step3: C lick “apply” to save the setting; click “exit” to exit current interface. Fig 4-13 Record Configuration-Time
4.3.4 Stamp
Parameter Meaning
Rate Range from: 1-30
（NTSC）1-25(PAL)
Resolution Support CIF , HD1, D1
Quality The higher the value is, the clearer the
recorded image is. Six options: lowest,
lower, low, medium, higher and highest.
Encode VBR and CBR
Max bit
stream
Range from: 256kbps~2Mpbs