Aquametrix 2300 Multi-Input Controller User Manual - Manual (Page 24)

N116-133 AquaMetrix 2300 Installation and Operation Manual Page 24
Figure 15 - Probe Configuration Wizard, page 6, Relay drop down menu
Figure 16 – Probe Configuration Wizard, page 6, Select Relay. Relay 2 is selected (red shading),
Relay 4 is available (yellow outline). Click inside yellow outline to select Relay 4 instead.
The next step is to enter the control trip points. There are two inputs needed, the trip point to
activate the relay and the trip point to reset, or deactivate the relay. Both are in the scaled/