Aquametrix 2300 Multi-Input Controller User Manual - Manual (Page 43)

N116-133 AquaMetrix 2300 Installation and Operation Manual Page 43
13.2. 6-channel Relay Output card
The 6-channel Relay Output card provides four normally open relay outputs and two relay
outputs that have both normally open and normally closed contacts with the following
connections:
Figure 30 - 6 Relay Output Card connections
13.3. 7-channel Digital Input card
The 7-channel Digital Input card provides seven additional digital inputs with the following
connections:
Figure 31 - Input Card connections
13.4. 4-channel Analog Output card
This card provides for 4 channels of 4-20 mA output loops which may be programmed via the
Monitor function in the Probe Configuration Wizard. More than one output may be set for an
input, and the outputs may be used for the virtual channels as well.
If the card is in place, the drop down menu of the Monitor Type will show Analog Output on
the bottom of the list. If chosen, the output may be mirrored to an analog input, or scaled to
the value of any probe, real or virtual. For further information, refer to the instructions
accompanying the card.