Edwards Signaling 102 DeviceNet User Manual
Page 15
P/N 3100125 ISSUE 3
PAGE 15
Electrical
Manufacturers
Replacement
Lamp Life (hours)
Catalog No.
Ratings
Lamp Ratings
Lamp
Calculated
#
Projected
##
Base Units
102TBS-DN-G1
24V DC, 1.75A
+
N/A
N/A
N/A
N/A
102TBS-DN-N5
120V AC, 0.60A
+
Optional Horn Assembly
102SIGMT-DN-G1
24V DC, 0.05A
N/A
N/A
N/A
N/A
Lens Modules
102LM-*
N/A
N/A
N/A
N/A
N/A
Light Sources
102LS-SINH-G1
24V DC, 0.32A
9 Watts
50LMP-9WH
12,000
--
or Ind. Trade 303***
3,000
--
102LS-SINH-N5
120V AC, 0.11A
12 Watts
50LMP-12WH
20,000
--
102LS-SIN-G1
24V DC, 0.32A
10 Watts
50LMP-10W or
10,000
--
Ind. Trade 303
3,000
--
102LS-SIN-N5
120V AC, 0.08A
10 Watts
50LMP-10W
2,500
--
102LS-ST-G1
24V DC, 0.30A
3 Joule Strobe
--
3,000
###
--
102LS-ST-N5
120V AC, 0.12A
3 Joule Strobe
--
3,000
###
--
102LS-SLEDA-G1** 24V DC, 0.062A
--
N/A
100,000
--
102LS-SLEDB-G1**
102LS-SLEDG-G1**
102LS-SLEDR-G1**
102LS-SLEDW-G1**
102LS-SLEDA-N5**
120V AC, 0.022A
--
N/A
100,000
--
102LS-SLEDB-N5**
102LS-SLEDG-N5**
102LS-SLEDR-N5**
102LS-SLEDW-N5**
+
Currents shown are for a stackable indicator with 5 light modules.
*Signifies lens module color (A - amber, B - blue, C - clear, G - green, R - red)
**Signifies lens and LED module color (A - amber, B - blue, G - green, R - red) NOTE: LED light sources must be used with
the corresponding color lens module (e.g., a blue LED light source, 102LS-SLEDB-G1, must be used with a blue lens,
102LM-B).
***A non-halogen lamp, as listed, may be used in place of the halogen lamp.
#
At nominal operating voltage.
##
Projected lamp life based on manufacturer's calculated lamp life @ 65 fpm and 50% duty cycle.
###
Strobe tube life @ operating power to 75% efficiency.
Table 1. Triliptical DeviceNet Status Indicator Specifications
Operating DeviceNet Bus Current
0.12A
Current Draw supplied by separate power supply (per Light Module)
DC: 0.062 to 0.320A
AC: 0.022 to 0.120A
In-Rush Current supplied by separate power supply (per Light Module)
DC: 1.2A
AC: 0.5A
Flash Rate (selectable via second data byte of POLL command)
45, 60 or 80 fpm
Operating Temperature
32F to 158F (0C to 70C)
Table 2. Pertinent DeviceNet Specifications