Fire-Lite PRN-6 Operators Manual - Manual (Page 14)

➤ Printer in fanfold paper mode
Set the Paper Thickness Adjustment Lever according to the type
of paper to be used. Refer to page 18 (Setting the
print head
gap).
Set the Paper Type Selection Lever to Continuous Form Feed
Paper mode.
Open the Front Cover to its upright position until it snaps in.
This prevents unexpected closing of the cover.
Stand the Left and Right Tractor Fixing Levers up (in the
direction indicated by the arrow), and release the locks.
Open the Flaps of the Left and Right Tractors.
Match the Left and Right Tractors to the paper width.
Locate the Paper Plate in the center between the Left and Right
Tractors.
Front Cover
Paper Type
Selection Lever
Tractor
Paper Plate
Tractor
Loading paper Quick start-up
12