Fire-Lite PRN-6 Operators Manual - Manual (Page 24)

The selection made will not be retained after printer power-off. For information on how to se-
lect a font permanently, refer to online documentation on the CD-ROM, chapter 1 (
Menu
description table).
➤ Setting the
character pitch You can use the CPI key to set the character pitch in Setup mode.
Press the Setup key.
Press the Char key.
Press the CPI key.
Press the < or > key to select the desired pitch.
Confirm your selection by pressing the Set key.
Press the Setup key. The printer returns to its initial status.
You can also press the Online key. The printer changes directly in Online mode.
The selection made will not be retained after printer power-off. For information on how to select a
font permanently, refer to online documentation on the CD-ROM, chapter 1 (Menu description
table ).
STOP
Setup
Online
Adjust Paperway
Menu Char
Setup
Online
Font CPI
Setup
Online
10 CPI *
Set Exit
Setup
Online
Font CPI
STOP
Settings (II) Quick start-up
22