HT instruments HT4010 User Manual

Page 38

Advertising
background image

HT4010

EN - 17

7 SERVICE

7.1 WARRANTY

CONDITIONS

This instrument is guaranteed against material or production defects, in accordance with
our general sales conditions. During the warranty period the manufacturer reserves the
right to decide either to repair or replace the product.
Should you need for any reason to return back the instrument for repair or replacement
take prior agreements with the local distributor from whom you bought it. Do not forget to
enclose a report describing the reasons for returning (detected fault). Use only original
packaging. Any damage occurred in transit due to non original packaging will be charged
anyhow to the customer.
The manufacturer will not be responsible for any damage to persons or things.

The warranty doesn’t apply to:
• Accessories and batteries (not covered by warranty).

• Repairs made necessary by improper use (including adaptation to particular

applications not foreseen in the instructions manual) or improper combination with
incompatible accessories or equipment.

• Repairs made necessary by improper shipping material causing damages in transit.

• Repairs made necessary by previous attempts for repair carried out by non skilled or

unauthorized personnel.

• Instruments for whatever reason modified by the customer himself without explicit

authorization of our Technical Dept.


The contents of this manual cannot be reproduced in any form without our authorization.

Our products are patented. Our logotypes are registered. We reserve the right to
modify characteristics and prices further to technological developments.


7.2 SERVICE
Shouldn’t the instrument work properly, before contacting your distributor make sure that
battery is correctly installed and working, check the test leads and replace them if
necessary. Make sure that your operating procedure corresponds to the one described in
this manual.
Should you need for any reason to return back the instrument for repair or replacement
take prior agreements with the local distributor from whom you bought it. Do not forget to
enclose a report describing the reasons for returning (detected fault). Use only original
packaging. Any damage occurred in transit due to non original packaging will be charged
anyhow to the customer.
The manufacturer will not be responsible for any damage to persons or things.

Advertising