KANOMAX 2211 Handheld IAQ Monitor - Manual (Page 11)

6
2.4 Powering IAQ Monitor ON/OFF
You can turn ON and OFF the IAQ Monitor by flicking the switch on the side. When you turn on the power after
connecting Probe , Manufacturer’s logo, model name and its software version appear on the display for a few
seconds.
◆ Battery Level Indicator
The indicator changes as you see it below:
You will see the above warning when Probe is not properly
connected or not connected at all. Turn off the instrument,
check Probe connection and try again.
POWER
I ＯＮ
Ｏ
ＯＦＦ
The Battery Level Indicator appears in the upper
right corner, and it is difficult to predict the battery life.
This
“Battery Indicator” gives you the battery status and
reminds you the timing for battery replacement.
（ blinks）
Time to replace batteries ― LOCK ―
When is displayed, every function of the instrument will be
locked. The measurement will stop and data will NOT be saved.
Please pay an attention.
Display Icons: （see P.10）
① Current Date and Time ④ Temperature （Humidity）
② CO
2
⑤ Battery Level indicator
③ CO
① ⑤
Normal Mode
Connect probe to Main body.
②
③
④
Power ＯＮ.
Calibrated Day