Start/stop, Reboot system, Factory default system – ADTRAN ATLAS 810 Plus User Manual
Page 75: Reboot system -23 factory default system -23
Advertising
Chapter 6. Terminal Menu and System Control
61200266L1-1
ATLAS 810
PLUS
User Manual
6-23
»» Start/Stop
Write security: 5; Read security: 5
If the ping client is currently idle, this menu sends pings to the specified
address. If the ping client is active, the menu stops sending pings.
» Reboot System
Write security: 2; Read security: 5
Reboots the ATLAS 810
PLUS
. When you select this command, the following
message displays:
**WARNING ** This will reboot the entire system!
ý
Press
y
to
reboot the system, or
n
to exit the command.
» Factory Default
System
Write security: 0; Read security: 0
Resets the entire system to the factory default settings. To reset the system,
press
y
; to cancel this command, press
n
.
Advertising