KROHNE BM 700 EN - Manual (Page 8)

Page 8 BM 700 Installation and Operating Instructions
4 Setting the parameters
Setting parameters via program PC-CAT
With the program PC-CAT, version 3.00 or higher, you can configurate BM 700
instruments in a very comfortable way form a PC. Connect the current output of
BM 700 over a load between 120
Ω
and 350
Ω
to the Smart adapter (delivered
together with PC-CAT) and connect it with a serial port of the PC.
Local display (optional)
• Numeric display, measured values
‚ Alphanumeric display, function/unit
ƒ Max. 6 markers to display measurement
status
„ 3 keys for configuration and error
interrogation
… Magnetic sensors for operator control
through the closed housing (function
same as the 3 keys)
† Compass field, indicates actuation of a
key
Adapter
≥ 120 Ω
RS232