Alpine CDA-7969R - Manual (Page 15)

13
-EN
Manual Storing of Station Presets
1
Select the radio band and tune in a desired radio
station you wish to store in the preset memory.
2
Press and hold any one of the Preset buttons
(F1 through F6) for at least 2 seconds until the
station frequency on the display blinks.
3
Press the Preset button into which you wish to
store the station while the frequency display is
blinking (within 5 seconds).
The display stops blinking once the station has
been memorized. The display shows the band,
preset No. with a triangle (
9) and station
frequency memorized.
4
Repeat the procedure to store up to 5 other
stations onto the same band.
To use this procedure for other bands, simply
select the band desired and repeat the
procedure.
A total of 30 stations can be stored in the preset
memory (6 stations for each band; FM1, FM2,
FM3, MW and LW).
NOTE
If you store a station in a preset memory which already
has a station, the current station will be cleared and
replaced with the new station.
Automatic Memory of Station
Presets
1
Press the SOURCE button to select the radio
mode.
2
Press the BAND button repeatedly until the
desired radio band is displayed.
3
Press and hold the A. ME button for at least 2
seconds.
The frequency on the display continues to
change while the automatic memory is in
progress. The tuner will automatically seek and
store 6 strong stations in the selected band.
They will be stored into presets F1 to F6 buttons
in order of signal strength.
When the automatic memory has been
completed, the tuner goes to the station stored in
the preset location No. 1.
NOTE
If no stations are stored, the tuner will return to the
original station you were listening to before the auto
memory procedure began.
Tuning to Preset Stations
1
Press the SOURCE button to select the radio
mode.
2
Press the BAND button repeatedly until the
desired band is displayed.
3
Press the station Preset button that has your
desired radio station in memory.
The display shows the band, preset number with
a triangle and frequency of the station selected.
Auto Station Search While
Travelling
This function will automatically search for up to 12
stations receivable in the region you are in and
store them in temporary memory.
Use this function when you are travelling in a
region away from home.
1
Press the BAND button repeatedly until the
desired radio band is displayed.
Each press changes the radio bands as follows:
→ FM1 → FM2 → FM3 → MW → LW
2
Press the F button. The FUNC indicator will
illuminate.
3
Press the F5 (TRVS) button to activate the
Travel Search mode. The unit will automatically
search and store up to 12 stations (max.)
receivable in the region you are travelling.
4
To recall a station stored, press the DN g or
f UP button.
To deactivate the Travel Search mode, press the
F5 button.
5
Press the F button to activate the normal mode.
The FUNC indicator will turn off.
NOTES
• If no stations are stored, the display shows "NO
MEMORY."
• When the radio band is changed, the stations stored in
memory using this function will be erased.
• Operate the unit while the FUNC indicator is
illuminated.
If no buttons are pressed within 5 seconds, the FUNC
indicator will turn off.