Alpine CDA-7969R - Manual (Page 25)

23
-EN
REMOTE CONTROL UNIT RUE-4185
MUTE
CD-CHG
SOURCE A.PROC
ENT
BAND
PROG
PWR
VOLUME
1
2
3
4
5
6
8
7
9
!
#
"
8 g Button
Radio mode: SEEK (DN) Button
CD mode: Press the button to go back to the
beginning of the current track.
9 f Button
Radio mode: SEEK (UP) Button
CD mode: Press the button to advance to the
beginning of the next track.
! 9 Button
Radio mode: Pressing the button will select, in
descending order, stations programmed into the
radio's presets as shown below.
→ 6 → 5 ... 1
CD Changer mode: DISC Select (DN) Button
Press the button to select a disc in descending
order.
" Source Button
Press to select the audio source.
# Audio Processor Button ∗∗
Press the button to call the external audio
processor mode.
∗
∗
For the operation of external audio processor, refer to the
Owner's Manual of the external audio processor you
purchased.
∗∗
This button is used in conjunction with an optional Ai-
NET processor.
Remote Control Operation
Controls on Remote Control
1 Mute Button
Press the button to lower the volume by 20 dB
instantly. Press the button again to cancel.
2 Power Switch
Press the switch to turn the power on/off.
3 -/J Button
Press the button to switch between the Play and
Pause modes for CD.
4 CD Changer Button
Press the button to change to the CD changer
operation.
5 Band/Programme Button
Radio mode: BAND Button
Press the button and the band will change as
shown below.
→ FM1 → FM2 → FM3 → MW → LW
6 Volume Adjustment Buttons
To increase the volume level:
Press the
L button
To decrease the volume level:
Press the
K button
7 8 Button
Radio mode: Pressing the button will select, in
ascending order, stations programmed into the
radio's presets as shown below.
→ 1 → 2 ... 6
CD Changer mode: DISC Select (UP) Button
Press the button to select a disc in ascending
order.