KYORITSU 6305 Quick Manual - Manual (Page 14)

− 13 − KEW6305
KEW6305 Measurement Ranges
5. Measurement Ranges
KEW6305 can perform the following three different measurements.
(a) Instantaneous value measurement (W Range)
(b) Integration value measurement (Wh Range)
(c) Demand measurement (DEMAND Range)
Select a desirable Range according to the steps below.
1. Set the Function Switch to W/ Wh/ DEMAND Range.
Set the switch to W/ Wh/ DEMAND position.
2. Select a Range
Any one of following symbols blinks on the LCD to show which Range has been selected.
e.g.: When Wh Range is selected, symbol blinks.
(a) Selecting W Range
(1) Use the Keys and select the “ W ” symbol on the LCD.
(2) Then use the Keys to switch screens (1- 3) to be displayed.
Screen 1 “-” symbol blinks on the top
Screen 2 “-” symbol blinks on the middle
Screen 3 “-” symbol blinks on the bottom
(b) Selecting Wh or DEMAND Range
(1) Use the Keys and select the “ ” symbol while the Function switch is at the W
Range position.
(2) Press the Keys and select the Wh or DEMAND Range.
(Selecting either “Wh” or “DEMAND” Range is impossible unless “ ” symbol is not selected.)
(3) Use the Keys and switch the displayed contents.