KYORITSU 6305 Quick Manual - Manual (Page 19)

− 18 − KEW6305
KEW6305 Integration value measurement: Wh Range
7. Integration value Measurement: Wh Range
7-1. Steps for measurement
Ensuring your safety
↓
Preparation for measurement
↓
Setting
↓
Wiring
↓
Integration value measurement
● Parameters for Wh Range
Parameters to be displayed on the LCD Unit
Active
energy
(consumption)
WP : Total active energy
WP1/WP2/WP3 : Active energy of each phase
Wh
Apparent
energy
(consumption)
WS : Total apparent energy
WS1/WS2/WS3 : Apparent energy of each phase
VAh
Integration
elapsed time
TIME : Hour; Min.; Sec.
Hour; Min.
Hour
---
SET UP Range
Basic Setting Measurement setting
“ Setting 01” Wiring system“Setting 09” Recording interval
“ Setting 02” Voltage range “Setting 10” Specifying rec. period or endless rec.
“ Setting 03” Clamp sensor “Setting 11” Time period setting Time setting
“ Setting 04” Current range“Setting 12” Time period setting Date setting
“ Setting 05” VT ratio
(if necessary)“Setting 13” Start of continuous measurement
“ Setting 06” CT ratio
(if necessary)“Setting 14” End of continuous measurement
Range