KYORITSU 3316 User Manual
Page 16
― 14 ―
<Auto discharge function>
This function allows electric charges stored in the capacitance of
the circuit under test to be automatically discharged after
testing.Discharge can be monitored by the AC voltage reading.
(6) Set the Range switch to the OFF position, and disconnect the
probes from the instrument.
Note:
Current of about 200μA is consumed when the Range switch is
at any range other than "OFF" position. Ensure that the Range
switch is set to "OFF" position when not using the instrument.
6−3 Continuous measurement
For continuous measurement, a lock-down feature is
incorporated on the Test button. Pressing and turning clockwise
locks the button in the operating position, the button is released
by turning it counterclockwise.
DANGER
While the Test button is locked down, a high voltage is present
at the tip of a probe. Attention should be paid to avoid possible
shock hazard.